LED ASSEMBLE BELT LINE

1. Total width of the line is about 1.2 meters, the length of each station is 0.8 meters, unilateral 10 stations,

bilateral 20 stations, the total length of a single line is 12 meters;

2. Total height of the line is about 2.0 meters, working face height of the line is 750mm±20mm;

3. Set instrument shelf about 400 mm above the line, about 400 mm wide;

4. The table board is produced by plastic fire prevention board (δ = 18 mm), laid δ = 1.8 mm green anti-static

rubber, beautiful and durable;

5. Frame is produced by A40 × 40 mm state standard square tube, the top of assembly line equipped with fluorescent

lamp light source and lamp-chimney;

6. Each station configured: one 600 mm x 800 mm x 730 mm workbench, one components box, one A4

transparent process drawing board, one multi-function extension

generator, tool box (optional) and steel round stool (optional);

7. Appearance treatment: sheet metal parts, rack with electrostatic powder coating processing;

8. Each station power (including lighting, instrument inserted board power supply and etc.) can be under

centralized control by assembly line network control system,the teacher click on each station control button

of the assembly line network management software, the corresponding station gets power supply,

then the students can operate with power; The unpointed station cannot get power supply;

The teacher machine software also can set all stations of every line centralized power supply.

When the teacher machine centralized control malfunctions, each station can be provided with

manual power supply through the key switch.

The central control system can save electricity consumption,

at the same time it is very suitable for the student appraisal of related operations